Tripp Lite SmartPro 2200RMXL2U UPS System SMART2200RMXL2U

Tripp Lite SmartPro 2200RMXL2U UPS System SMART2200RMXL2U provides intelligent, line-interactive battery backup for network devices and servers. 2200 VA of battery backup allows you to work through short blackouts or safely shut down during longer ones. The unit has 8 outlets, diagnostic LEDs and 3 built-in serial ports that work with PowerAlert Software to provide simultaneous automatic unattended shutdown of multiple servers. Tripp Lite's PowerAlert Software is the only UPS software capable of managing every type and brand of UPS on your network, from every manufacturer. $250,000 Ultimate Lifetime Insurance (USA & Canada Only). No warranty cards required for coverage!

KEY BUYING POINTS

2,200 VA output power rating (1,600 watts)

8 protected outlets (6 NEMA 5-15R, 2 NEMA 5-20R)

Includes NEMA 5-20 straight blade 20 amp input plug connection; package includes optional user installable NEMA 5-15 input plug connection

Rackmount fits standard 19 in. rack (2 rack spaces) with an installed depth of only 15 inches

Extended runtime available with BP48V242U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs

4 built-in communications ports (2-DB9, 2-USB)for remote monitoring and unattended shutdown

PowerAlert Unattended Shutdown Software and 3 (6 ft.) network cables included

PowerAlert Software compatible with every brand of UPS, from every manufacturer

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again

Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities

Line-interactive with 4 levels of automatic voltage regulation (AVR)

Complete surge protection and EMI/RFI noise filtering

$250,000 Ultimate Lifetime Insurance (USA & Canada Only) — No warranty cards required for coverage!

2 year manufacturers product warranty

Diagnostic LEDs (indicate 17 performance conditions)

Hot-swap battery replacement

External battery capability

TYPICAL APPLICATIONS

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

OPTIONS & ACCESSORIES

External Battery Pack: BP486RT3U or BP48V242U

SNMP accessories: SNMPWEBCARD, ENVIROSENSE

WATCHDOGSW System Software

USB Hubs-accessories: U202-004-R, U205-004-R, DUSB, U022-010

Dataline protectors: DNET1, DTEL2, DCATV

Circuit Tester: CT120

Rack enclosures: SRNET45UB, SR45U, SR45UB, SR24XUB

Power Distribution: PDU1220, PS7224-20

Tower Stands: 2-9USTAND

2 post rackmount kit: PDU1220

PACKAGE INCLUDES

SMART2200RMXL2U UPS System, PowerAlert Software and cabling, Mounting hardware for 4 post rackmount installation, Warranty information, Instruction manual

COMPLETE SPECIFICATIONS SYSTEM OVERVIEW System overview: Smart Pro line interactive 2U expandable rack / tower UPS with integrated switched PDU Voltage compatibility: 120V AC Frequency compatibility: 60 Hz OUTPUT Output volt amp capacity (VA): 2200 Output watt capacity (watts): 1600 Output nominal voltage: 120V AC Output voltage regulation: LINE MODE: Sine wave line voltage 120V (-18% / +8%) BATTERY MODE: Sine wave output 120V +/-5% Output frequency regulation: LINE MODE: Passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz Outlet quantity / type: 4 NEMA 5-15R and 4 NEMA 5-15/20R Customized load management receptacles: 3 single outlet load banks with integraded switched PDU supports automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. Overload protection: Resettable circuit breaker INPUT Maximum input amps: 16A / 1733 watts Input connection type: NEMA 5-20P Input cord length: 10 ft., 12 gauge, black Recommended electrical service: 20A 120V BATTERY Full load runtime: 8 minutes (2200VA) Half load runtime: 20 minutes (1100VA) Expandable battery runtime: Supports extended runtime with optional external battery packs BP48V242U (limit 1) and BP48V60RT3U (multi-pack compatible) DC system voltage: 48V DC Typical battery lifespan: 3-6 years, depending on usage Battery recharge rate: 2-4 hours to 90% Replacement Battery Cartridge: RBC94-2U VOLTAGE REGULATION Voltage regulation description: Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 79V and overvoltages to 147V Overvoltage correction: Input voltages between 128 and 147V AC are reduced by 12% Direct pass through: Input voltages between 105 and 127V AC are passed on to connected equipment unchanged Brownout correction: Input voltages between 95 and 104V AC are boosted by 12% Severe brownout correction: Input voltages between 79 and 94V AC are boosted by 24% LEDS ALARMS & SWITCHES Front panel LEDs: 5 front panel LEDs — Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. Alarms: 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone) Switches: Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions SURGE / NOISE SUPPRESSION AC surge suppression: 480 joules AC suppression response time: Instantaneous EMI / RFI AC noise suppression: Yes PHYSICAL Shipping weight (lbs): 72 Shipping weight (kg): 32.7 Unit weight (lbs): 64 Unit weight (kg): 29.1 Unit Dimensions (HWD/in): 3.5 x 17.5 x 19 Unit Dimensions (HWD/cm): 8.89 x 44.5 x 48.3 Shipping Dimensions (HWD/in): 9 x 23.5 x 20 Shipping Dimensions (HWD/cm): 5.1 x 59.7 x 122.7 Material of construction: Steel Form factors supported: Rack/Tower (2U) Cooling method: Fan Battery Access: Battery access door allows hot swap battery replacement without powering connected equipment off ENVIRONMENTAL Operating Temperature: +32 to +104 degrees Fahrenheit 0 to +40 degrees Celsius Storage Temperature: +5 to +122 degrees Fahrenheit -15 to +50 degrees Celsius Relative Humidity: 0 to 95%, non-condensing Line mode BTU/hr. (Max.): 218.2 BTU/hr. COMMUNICATIONS Network monitoring port: Includes 4 built-in monitoring ports, 2-USB & 2-DB9. Each supports on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment. Supports reboot of all connected devices at once via software interface. Compatible with Tripp Lite's PowerAlert software. Software and cabling included: Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Ships with 4 cables, 2-USB to USB & 2-DB9 to DB9 SNMP compatibility: Built-in accessory slot accommodates internal SNMPWEBCARD and other network accessories WatchDog compatibility: Yes, compatible with Tripp Lite's WatchDog system service software to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications LINE / BATTERY TRANSFER Transfer time from line power to battery mode: 2-4 milliseconds Low voltage transfer to battery power: 79V (resets to line power as voltage increases to 83V) High voltage transfer to battery power: 147V (resets to line power as voltage decreases to 144V) CERTIFICATIONS Certifications: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico) WARRANTY Optional coverage: 3 year, 5 year, next day and on-site warranty coverage available for select opportunities Product warranty: 2 year product warranty Connected equipment insurance (USA and Canada Only): $250,000 connected equipment insurance (USA / Canada only) SPECIAL FEATURES EPO port: Includes RJ11 EPO (emergency power off) port and interconnection cable TVSS grounding: Includes back panel grounding point with thumbscrew for data line surge suppressors and other network accessories requiring a safe grounding point Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure Appearance: Attractive black rackmount housing, optional use 2U black front bezel included to enable black color appearance BATTERY PACK ACCESSORY (optional) Battery Pack Accessory (optional): BP48V242U (limit 1) and BP48V60RT3U (multi-pack compatible)

		Tripp Lite SMART2200RMXL2U Brochure				Tripp Lite SmartPro Rackmount Owners Manual