|
SYSTEM
OVERVIEW |
|
System overview:
|
Smart Pro line interactive 1U
rackmount UPS with integrated
switched PDU
|
|
Voltage compatibility:
|
120 VAC
|
|
Frequency compatibility:
|
60 Hz
|
|
OUTPUT |
|
Output volt amp capacity
(VA):
|
1000
|
|
Output watt capacity
(watts):
|
640
|
|
Output nominal voltage:
|
120V AC
|
|
Output voltage regulation:
|
LINE MODE: Sine wave line voltage
120V (-21% +8%), BATTERY MODE: Sine
wave output within 5% of 120VAC
|
|
Output frequency regulation:
|
LINE MODE: Passes line frequency of
60Hz +/-10% BATTERY MODE: Inverter
output regulated to 60Hz +/-0.5Hz
|
|
Outlet quantity / type:
|
6 NEMA 5-15R
|
|
Customized load management
receptacles:
|
Includes 2 single-outlet load banks
that support automated load shedding
and remote reboot on demand of
locked network devices. Configurable
via PowerAlert software to
automatically switch off optional
loads, like monitors, to increase
available runtime for servers and
other critical devices.
|
|
Overload protection:
|
Via 15A input breaker
|
|
INPUT |
|
Maximum input amps:
|
9.2A
|
|
Input connection type:
|
NEMA 5-15P
|
|
Input cord length:
|
10 ft., 14 gauge
|
|
Recommended electrical
service:
|
15A 120V
|
|
BATTERY |
|
Full load runtime:
|
10 minutes (640 watts)
|
|
Half load runtime:
|
25 minutes (320 watts)
|
|
DC system voltage:
|
24 VDC
|
|
Typical battery lifespan:
|
3-6 years, depending on usage
|
|
Battery recharge rate:
|
2-4 hours to 90%
|
|
Replacement Battery
Cartridge:
|
RBC64-1U
|
|
VOLTAGE
REGULATION |
|
Voltage regulation
description:
|
Line interactive voltage regulation
system corrects input voltages
between 83 and 147 back to usable
120V nominal levels.
|
|
Overvoltage correction:
|
Input voltages between 128 and 147
are reduced by 12%
|
|
Brownout correction:
|
Input voltages between 83 and 107
are boosted by 14%
|
|
LEDS
ALARMS & SWITCHES |
|
Front panel LEDs:
|
5 front panel LEDs - Green POWER
LED, 3 color BATTERY CHARGE LED, 3
color OUTPUT LOAD LEVEL LED, red
BATTERY WARNING LED.
|
|
Alarms:
|
3 function audible alarm indicates
power failure conditions (4 short
beeps every 10 seconds), overload
(continuous short beeps) and low
battery (continuous tone)
|
|
Switches:
|
Yes, includes 2 front panel mounted
push-button switches for system
enable, self-test and alarm cancel
functions
|
|
SURGE /
NOISE SUPPRESSION |
|
AC surge suppression:
|
480 joules
|
|
AC suppression response
time:
|
Instantaneous
|
|
EMI / RFI AC noise
suppression:
|
Yes
|
|
PHYSICAL |
|
Shipping weight (lbs):
|
36
|
|
Shipping weight (kg):
|
16.3
|
|
Unit weight (lbs):
|
32
|
|
Unit weight (kg):
|
14.5
|
|
Unit Dimensions (HWD/in):
|
1.75 x 17.5 x 16.75
|
|
Unit Dimensions (HWD/cm):
|
44.5 x 44.5 x 42.5
|
|
Shipping Dimensions
(HWD/in):
|
6.25 x 23.5 x 22.5
|
|
Shipping Dimensions
(HWD/cm):
|
15.9 x 60 x 57.2
|
|
Material of construction:
|
Steel
|
|
Form factors supported:
|
Rack/Tower (1U)
|
|
Cooling method:
|
Built-in cooling fan
|
|
Battery Access:
|
Battery access door allows hot swap
battery replacement without powering
connected equipment off
|
|
ENVIRONMENTAL |
|
Operating Temperature:
|
+32 to +104 degrees Fahrenheit / 0
to +40 degrees Celsius
|
|
Storage Temperature:
|
+5 to +122 degrees Fahrenheit / -15
to +50 degrees Celsius
|
|
Relative Humidity:
|
0 to 95%, non-condensing
|
|
Line mode BTU/hr. (Max.):
|
55.8
|
|
Battery mode BTU/hr. (Max.):
|
189.2
|
|
COMMUNICATIONS |
|
Network monitoring port:
|
Includes 2 built-in monitoring
ports, 1-USB & 1-DB9. Each supports
on battery, low battery, power
restored, AC line voltage, DC
battery voltage, load percentage,
battery charge current, battery
capacity, internal UPS temperature
and line frequency status messaging.
Interface supports timed inverter
shutoff after unattended shutdown,
activate self-test and 10 second
reboot of connected equipment.
Supports reboot of all connected
devices at once or individual load
banks via software interface.
Compatible with Tripp Lite's
PowerAlert and WatchDog software.
|
|
Software and cabling
included:
|
Includes PowerAlert UPS monitoring
software for network and standalone
operating systems. Ships with
complete USB and DB9 cabling.
|
|
SNMP compatibility:
|
Built-in accessory slot accommodates
internal SNMP / Web card and other
network accessories
|
|
WatchDog compatibility:
|
Yes, compatible with Tripp Lite's
Watchdog system service to restore
operation to locked equipment
through soft reboot of application /
OS or hard power off/on reboot of
connected equipment - ideal for
unattended kiosk applications
|
|
LINE /
BATTERY TRANSFER |
|
Transfer time from line
power to battery mode:
|
2-4 milliseconds
|
|
Low voltage transfer to
battery power:
|
83V (resets to line power as line
voltage increases to 87V or higher)
|
|
High voltage transfer to
battery power:
|
147V (resets to line power as line
voltage decreases to 143V or lower)
|
|
CERTIFICATIONS |
|
Certifications:
|
UL1778 (USA), cUL (Canada), Class A
(emissions), NOM (Mexico)
|
|
WARRANTY |
|
Optional coverage:
|
3 year, 5 year, next day and on-site
warranty coverage available for
select opportunities
|
|
Product warranty:
|
2 year product warranty
|
|
Connected equipment
insurance (USA and Canada Only):
|
$250,000 connected equipment
insurance (USA / Canada only)
|
|
SPECIAL
FEATURES |
|
EPO port:
|
Includes RJ11 EPO (emergency power
off) port and cable
|
|
TVSS grounding:
|
Includes back panel grounding point
with thumbscrew for data line surge
suppressors and other network
accessories requiring a safe
grounding point
|
|
Cold Start:
|
Yes, inverter can be "cold started"
to enable temporary AC output during
a power failure
|
|
Appearance:
|
Attractive black color scheme
|
