Tripp Lite Smart Online 1000 Expandable Tower UPS System SU1000XL

DESCRIPTION

Tripp Lite's Smart Online SU1000XL on-line, double conversion UPS protects critical server, networking or telecommunications equipment from blackouts, brownouts, voltage fluctuations and surges in an attractive all-black upright tower. Large capacity 1kVA / 800 watt UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at 120V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations and other hard-to-solve power problems not addressed by other UPS systems. True sine wave output and zero transfer time offers guaranteed compatibility with all equipment types. Includes 6 UPS supported outlets arranged in two individually switchable load banks that can be independently controlled via a software interface to selectively reboot remote equipment, or automatically shed less critical loads to extend battery runtime for the most critical equipment. Battery support can be extended with the addition of multiple external battery packs (part# BP36V13). Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control and monitoring of UPS system and power data. Includes Tripp Lite's PowerAlert UPS Power Management Software. Compatible with Tripp Lite's Watchdog Service Monitoring/Rebooting Software.

  KEY BUYING POINTS

True on-line, double conversion UPS provides a constant, pure sine wave AC output

Maintains continuous operation through blackouts, brownouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems

Accepts input voltages between 80 and 138 (65 to 138 at loads under 70%), regulating output to 120V AC +/-2%

1000VA / 800 watt output capacity with 6 total outlets (6 NEMA5-15R)

Two built-in individually switchable load banks can be controlled via software interface to selectively reboot remote equipment or automatically shed less critical loads to extend battery runtime for the most critical equipment (2 banks of 3 outlets)

Standard internal battery set provides 18 minutes runtime at half load

Expandable runtime with multiple external battery packs (part# BP36V13)

Attractive all-black upright tower format

DB9 serial network interface supports RS-232 and contact closure messaging

Slot for optional SNMP/web card (part# SNMPWEBCARD)

Included PowerAlert UPS Power Management Software and cabling provides monitoring of in-depth site power conditions, full UPS status and fault warnings, output load level and load bank power control

Compatible with Tripp Lite's WatchDog Service Monitoring/Rebooting Software (part# WATCHDOGSW)

Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service

Diagnostic LEDs

$250,000 Ultimate Lifetime connected equipment insurance (USA & Canada only)

2 year manufacturer's product warranty

  TYPICAL APPLICATIONS

Ideal for protection of critical 120V servers, networking equipment and sensitive electronics. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

  OPTIONS & ACCESSORIES

External battery pack: BP36V13

SNMP accessories: SNMPWEBCARD, ENVIROSENSE

Dataline protectors: DNET1, DTEL2, DCATV

Circuit Tester: CT120

Power distribution: PDU1215, PS7224

Extended warranties: 3 Year WEXT3-500-1500, 5 Year WEXT5-500-1500

  PACKAGE INCLUDES

SU1000XL Online Double-Conversion UPS System

PowerAlert Software and cabling

Instruction manual with warranty information

COMPLETE SPECIFICATIONS SYSTEM OVERVIEW System overview: Online, double conversion tower UPS system continuously maintains near-perfect output power for critical internetworking and telecommunications equipment. Completely regenerates input power into perfectly regulated sine wave output free of harmonic distortion, fast electrical impulses and frequency fluctuations. Maintains output within 2% of 120V during brownouts as low as 65V and overvoltages to 138V. Supports enhanced monitoring of UPS and line power conditions via DB9 serial port, included PowerAlert monitoring software and complete cabling. Includes slot for SNMPWEBCARD and 2 individually controllable output load banks. Runtime is expandable with BP36V13 battery packs. Voltage compatibility: 120V AC Frequency compatibility: 50/60 Hz compatible OUTPUT Output volt amp capacity (VA): 1000 Output watt capacity (watts): 800 Output nominal voltage: 120V AC Output voltage regulation: Maintains full-time sine wave output within 2% of 120V, less than 5% total harmonic distortion Output frequency regulation: Regulates line frequency to 50/60Hz +/- 0.05Hz Outlet quantity / type: 6 NEMA 5-15R Customized load management receptacles: 2 individually controllable banks of 3 outlets support automated load shedding and remote reboot on demand of locked network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices. Overload protection: Via 15A input breaker INPUT Maximum input amps: 8.6A Input connection type: NEMA 5-15P Input cord length: 6 ft. Recommended electrical service: 15A 120V BATTERY Full load runtime: 6 min - internal batteries / 30 min with 1 BP36V13 battery pack (1000VA) Half load runtime: 18 min - internal batteries / 70 min with 1 BP36V13 battery pack (500VA) Expandable battery runtime: 3 built-in 12V 7AH batteries DC system voltage: 36VDC Typical battery lifespan: 3-6 years, depending on usage Battery recharge rate: 4-6 hours to 90% VOLTAGE REGULATION Voltage regulation description: On-line, double-conversion power conditioning maintains output within 2% of 120 volts at all times Overvoltage correction: Maintains output of 120V +/-2% during overvoltages to 138VAC Brownout correction: Maintains output of 120V +/-2% during undervoltages to 80VAC Severe brownout correction: Maintains output of 120V +/-2% during undervoltages to 65VAC (during load conditions of 70% or less) LEDS ALARMS & SWITCHES Front panel LEDs: 14 STATUS LEDs offer LINE POWER, ONLINE, BYPASS, ON BATTERY, OVERLOAD, BATTERY LOW, REPLACE BATTERY and FAULT status information. Also includes 4 LED meters for LOAD LEVEL / BATTERY LEVEL display (Battery level readout requires pressing "test" key) Alarms: Multi-function audible alarm offers notification of UPS start, backup operation, low battery warning, overload, UPS fault and remote shutdown Switches: Includes main power off/on switch, plus 1 test switch SURGE / NOISE SUPPRESSION AC surge suppression: 480 joules AC suppression response time: Instantaneous EMI / RFI AC noise suppression: Yes PHYSICAL Shipping weight (lbs): 39.6 Shipping weight (kg): 18.0 Unit weight (lbs): 33 Unit weight (kg): 15.0 Unit Dimensions (HWD/in): 9.5 x 5.5 x 14.5 Unit Dimensions (HWD/cm): 24.2 x 14 x 36.8 Shipping Dimensions (HWD/in): 13 x 9.5 x 20 Shipping Dimensions (HWD/cm): 33 x 24.1 x 50.6 Material of construction: Steel Form factors supported: Tower Cooling method: Fan ENVIRONMENTAL Operating Temperature: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity: 0 to 95%, non-condensing Line mode BTU/hr. (Max.): 442.8 Battery mode BTU/hr. (Max.): 442.8 COMMUNICATIONS Network monitoring port: Built-in DB9 port offers both enhanced RS-232 enable monitoring data, plus contact closure monitoring ability Software and cabling included: Yes, includes PowerAlert software CD-ROM and complete cabling SNMP compatibility: Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD) WatchDog compatibility: Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of applications / OS or hard power off/on reboot of connected equipment — ideal for unattended kiosk applications LINE / BATTERY TRANSFER Transfer time from line power to battery mode: ZERO — online UPS continuously converts incoming AC to DC, then back to AC. When commercial power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power. Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 80V (65V during load conditions of 70% or less). Below the switchover point, output is supported from battery derived AC power. High voltage transfer to battery power: Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is supported from battery derived AC power. CERTIFICATIONS Certifications: Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), Class B (emissions), NOM (Mexico) WARRANTY Optional coverage: 3-5 year warranties, plus next day and on-site warranty coverage available for select opportunities. Contact Tripp Lite for additional information. Product warranty: 2 year product warranty Connected equipment insurance (USA and Canada Only): $250,000 connected equipment insurance (USA and Canada only) SPECIAL FEATURES EPO port: Supports EPO (emergency power off) via 73-0901 cabling Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure Appearance: Attractive all-black tower housing BATTERY PACK ACCESSORY (optional) Battery Pack Accessory (optional): BP36V13

		Tripp Lite Smart On-Line Owners Manual